LockDry Metal Decking Installation

1: Square & Fasten Starter

2: Fasten opposite side.
Starter & Finisher only.

3: Fill 2" long bead in the channel against the structure. Prevents water backup.

4: Seal the top interlocking joint 2".

5: Interlock & wipe excess sealant.

6: Fasten & Repeat for the remainder.

7: For Stucco, Brick, etc. run a bead of sealant the entire length of seam.

8: Lapped sidings use standard flashing under the siding to the top surface of the decking. Seal between the flashing & decking.

9: Fasten the edge trim the outside.

10: Steps use a Starter & Finisher

ENJOY!